Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Rapid City, SD

Concrete Sealing for Stamped Concrete in Rapid City, SD

Moderate-pressure wash for stamped concrete. Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete. Typical cost $400-$1,200.

From the free quote to the final rinse, concrete sealing for stamped concrete in Rapid City, SD follows a simple process: inspect, protect, clean, rinse and check. With stamped concrete, the right approach is moderate-pressure wash.

The right method for the job

Moderate-pressure washCleaning method
Usually 1,500-2,500 PSI, kept even so the sealer isn't stripped in patchesPressure

Cleaning solution: A sealer-safe cleaner; a degreaser for oil spots.

Caring for stamped concrete

Stamped and colored concrete is usually protected by a sealer. Washing it well is the first step before resealing, and the color and pattern look much better after both.

Avoid: High pressure that strips sealer unevenly or wears off color release on the surface.

How often: Wash yearly; reseal every 2-3 years.

Signs you need concrete sealing for stamped concrete

  • Water soaks in instead of beading
  • Stamped concrete looks faded and dull
  • Surface flaking or spalling has started
  • Stains soak in quickly

Why it gets dirty

  • Old sealer worn away by sun and traffic
  • Freeze-thaw cycles and deicing salts
  • Unsealed concrete absorbing oil and water

What you can do yourself

  • Do the water test: sprinkle water and see if it darkens the concrete quickly
  • Keep traffic off a newly sealed surface for the time on the label
  • Avoid deicers that contain ammonium nitrate or ammonium sulfate

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Sealing dirty or damp concrete, which traps stains and turns cloudy
  • Slippery finishes without an anti-slip additive
  • Applying too thick a coat, which peels

How we handle concrete sealing for stamped concrete

  1. Clean the concrete thoroughly
  2. Treat stains and let the surface dry
  3. Repair cracks where needed
  4. Apply a penetrating or film-forming sealer
  5. Keep traffic off until it cures

Concrete Sealing for Stamped Concrete cost in Rapid City, SD

$400-$1,200Typical range for a typical driveway or patio
1 day plus cure timeTypical time on site
Every 2-5 years, depending on the sealerRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for stamped concrete

Concrete Sealing for Stamped Concrete in Rapid City, SD

Freeze-thaw cycles and deicing salt are hard on concrete in South Dakota. Cleaning it in spring and sealing it before winter reduces how much water and salt soak in, which is what causes surface flaking (spalling).

We provide concrete sealing for stamped concrete across Rapid City (ZIP codes 57701, 57702, 57703 and 57709) and nearby towns including Rapid Valley (4.4 mi), Blackhawk (6.2 mi), Colonial Pine Hills (6.5 mi) and Box Elder (8.4 mi). Call (555) 010-0000 for a free quote in Rapid City.

Concrete Sealing for Stamped Concrete: frequently asked questions

How much does concrete sealing for stamped concrete cost in Rapid City, SD?

Concrete Sealing for Stamped Concrete typically costs $400-$1,200 for a typical driveway or patio, and usually takes 1 day plus cure time. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for concrete sealing for stamped concrete?

For stamped concrete: usually 1,500-2,500 PSI, kept even so the sealer isn't stripped in patches. What we avoid: high pressure that strips sealer unevenly or wears off color release on the surface. We keep the pressure even and controlled, with the right tools for the surface.

Is concrete sealing for stamped concrete safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule concrete sealing for stamped concrete?

Wash yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Rapid City, SD

Pool Deck Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $200-$500

Gum Removal

Removing chewing gum from sidewalks, entrances and plazas with hot water and steam.

Typical $200-$1,000

Gum Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$1,000

Pool Deck Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $200-$500

Sidewalk & Walkway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$250

Pre-Paint Washing for Aluminum Siding

Soft wash. Older aluminum siding often has a chalky, oxidized finish.

Typical $250-$600

Driveway Cleaning for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $150-$400

Commercial Pressure Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $400-$2,000

Efflorescence Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$600

Sidewalk & Walkway Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $100-$250

Exterior Mold & Mildew Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $250-$700

Pre-Paint Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $250-$600

Ready for a cleaner home or business?

Get a free pressure washing quote in Rapid City, SD. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote